RESISTANCE-BAND INSPECTION — PRODUCT AND SETUP RECORD
A reminder of observations and instructions, not safety certification or a load test.

SETUP RECORD 1
Product / brand / model / markings:
Manufacturer manual / version / access date:
Actual band and accessories:
Connection and support requirements:
Applicable recall question, if any:
Observation / uncertainty:
Affected equipment kept out of use:
Next action and who can clarify it:
Change since previous record:

SETUP RECORD 2
Product / brand / model / markings:
Manufacturer manual / version / access date:
Actual band and accessories:
Connection and support requirements:
Applicable recall question, if any:
Observation / uncertainty:
Affected equipment kept out of use:
Next action and who can clarify it:
Change since previous record:

COMPONENT LOG
Part | Condition observed | Instruction reference | Unresolved concern | Next action
_____ | _____ | _____ | _____ | _____
_____ | _____ | _____ | _____ | _____
_____ | _____ | _____ | _____ | _____
_____ | _____ | _____ | _____ | _____
_____ | _____ | _____ | _____ | _____

FIVE CONNECTED PARTS
Part | Look at | Concern | Next action
Elastic band or tube | Its accessible length, ends and attachment areas. | Any visible damage or an unexplained change in condition. | Stop using the affected equipment; ask its manufacturer about replacement.
Handles and their connections | Handle body, straps and the band-to-handle connection. | Damage, an insecure connection or a connection you cannot identify. | Do not use a workout repetition to settle the uncertainty.
Straps and fastenings | Accessible webbing, stitching, closure and any metal ring. | Damage or a closure that cannot be secured as instructed. | Leave that accessory out until its condition and use are resolved.
Clips and rings | The actual pieces specified for this band and accessory. | Damaged parts or uncertainty about which piece receives the clip. | Check the exact instructions; a clip fitting physically is insufficient.
Anchor and its setting | Anchor material and the specified door or stationary support arrangement. | Damage or inability to satisfy the product’s stated setup requirements. | Choose a suitable alternative or pause instead of improvising an attachment.

FIVE INSTRUCTION FIELDS
Field | What to find | What does not settle it
Product identity | Brand, model and the components actually supplied. | A similar color or the same advertised resistance.
Connection method | Which ring, loop or attachment point receives this particular band. | “Clip it anywhere it fits.”
Anchor setting | Permitted support, door placement and any closure, gap or locking requirement. | An ordinary door or piece of furniture merely being available.
Use and extension limits | The actual model’s instructions, including how any limit is defined. | A stretch ratio or load number from another product.
Care and replacement | The manufacturer’s storage, inspection and replacement directions. | An invented universal lifespan or a repair with tape.

EIGHT PRACTICE QUESTIONS
Case 1: A tube has a visible cut near an end. It still feels springy. Should you try two easy repetitions to see whether it holds?
Your action and reason:

Case 2: The elastic looks unchanged, but an anchor strap is fraying. Can you count the set as checked because you inspected the band?
Your action and reason:

Case 3: A borrowed tube has no identifiable brand or instructions. A video for a similar-looking set shows a door setup. Is that enough to choose its anchor?
Your action and reason:

Case 4: A Bodylastics clip can physically fit over the fabric loop of its door anchor. Does physical fit override the manual’s instruction to thread the band through that loop?
Your action and reason:

Case 5: An anchor’s instructions require a locked door, but the chosen door cannot be locked. Does a light first set resolve the missing requirement?
Your action and reason:

Case 6: A band contains an internal safety cord. Can you skip inspection because the cord makes the band snap proof?
Your action and reason:

Case 7: A band looks unused, but its brand, strap markings and resistance match the specific HomeProGym bands in the May 21, 2026 CPSC recall. Does the absence of visible wear cancel the recall?
Your action and reason:

Case 8: After checking a set, you change the anchor and add a different handle. Is the earlier record sufficient for the changed connections?
Your action and reason:

ANSWERS AND EXPLANATIONS
Case 1: No. Stop using the damaged equipment.
A workout repetition is not a way to clear visible damage. Bodylastics instructs users to inspect the whole set before each use and stop immediately if anything looks damaged. Follow the affected product’s replacement directions. Feeling elastic does not establish the integrity of the cut area, and reducing repetitions does not repair it.

Case 2: No. The anchor is part of the equipment check.
The load passes through more than the elastic. The manufacturer’s check includes handles, straps and anchors as well as bands. Leave the damaged accessory out and resolve replacement and compatibility before use. Inspecting one part cannot establish the condition of the connected system.

Case 3: No. Identify the equipment and obtain instructions for that product.
Similar appearance does not establish the permitted attachment, door placement or extension limit. Avoid putting tension on an uncertain setup to investigate it. Ask the owner or manufacturer for the product identity and matching instructions, or choose a suitable activity that does not require the unresolved equipment.

Case 4: No. Use the specified connection rather than the convenient one.
The reviewed manual distinguishes clipping to designated metal rings from threading through an anchor loop. Page 12 explicitly says not to clip a band to an anchor loop. Page 10 separately describes the Anywhere Anchor’s D-ring option. These are different attachment features; a clip fitting over fabric does not make that arrangement approved.

Case 5: No. Resolve the anchor setting before applying exercise tension.
A lighter set does not satisfy a stated closure or locking instruction. Select a suitable arrangement allowed by the actual product instructions, use a suitable alternative, or pause. For the reviewed Bodylastics system, the safety page specifies the hinge side and a locked door. Do not turn that product-specific direction into a universal rule for every anchor.

Case 6: No. The reviewed manufacturer explicitly says its bands are not snap proof.
Bodylastics describes an internal cord but also says no resistance band, including its own, is snap proof and the band will not catch you if it breaks. Keep the pre-use check and the product’s position and balance requirements. A protective feature does not remove the other instructions or prove the current condition of the set.

Case 7: No. Stop using the affected band and follow the exact recall notice.
The cited notice identifies specific purple 60-pound and gray 70-pound HomeProGym bands and a handle-separation hazard. A recalled product does not become cleared by looking new. Check the complete identification and remedy in the original notice. The notice does not mean that every purple band, every product from the brand or every band in a set is recalled.

Case 8: No. Recheck the components and instructions for the actual arrangement.
The earlier note described a different setup. Confirm the condition, compatibility and connection method of the pieces now being used. Record the change and any unresolved question. A dated checklist is a reminder of what was examined, not a certificate covering every later combination.

SOURCE REFERENCES
Bodylastics: currently linked User Manual, PDF pages 4–12
https://bodylastics.com/manual
U.S. CPSC: HomeProGym resistance-band recall, May 21, 2026
https://www.cpsc.gov/Recalls/2026/Resistance-Bands-Recalled-Due-to-Serious-Injury-from-Impact-Hazard-Imported-by-HomeProGym